Home     Herrman/Diamantor grinding head 3 mm, Stdad, 100/120 Mesh
Herrman/Diamantor grinding head 3 mm, Stdad, 100/120 Mesh

Herrman/Diamantor grinding head 3 mm, Stdad, 100/120 Mesh


229

Standard grain diamond head (100/120 mesh). Do not put too much pressure on the spindle to avoid the break.


25.15 
€ 20.79

Stock: 3


Article code: MO 235-229

Herrman/Diamantor grinding head 3 mm, Stdad, 100/120 Mesh


  • Product info

This grinding head has a grade of + / - 100-120 Mesh * and an outer diameter of + / - 3 mm. Fits on all machines having an axis diameter of 8 mm.

* The Mesh  value indicates the size of the diamond particles onto the shaft of the grinding head or grinding thorn . The higher the Mesh number, the smaller the grain size. 100 to 125 Mesh corresponds to a grain size of approximately 149 to 125 Micron. 100-120 mesh for grinding heads also referred to as "Standard" grade.

Grinding heads referred to as "Coarse" or "Power" or "Speed gritt" generally have a Mesh value of 60-80 Mesh (250-270 micron)
Grinding heads as referred to as "Fine" has a value of 200-220 Mesh (74-68 micron)
Grinding heads as referred to as "Super Fine" or " Extra Fine" has a Mesh value of > 400 - ( <37 Microns)