Home    Machines   Drilling   Pico Drill  Pico Drill 100 Mobile Glass drill with Cross laser
Pico Drill 100 Mobile Glass drill with Cross laser

Pico Drill 100 Mobile Glass drill with Cross laser


8964

Pico Drill 100 L

Mobile Glass drill

This precision machine developed by Bohle, can be applied directly to the glass. For this purpose, the machine is equipped with rubber outsole at the bottom and to the left and right of the machine base with suction units to be able to fixate the machine properly. Herewith a good stability is obtained. The lowering of the drill in the glass can be done via the rack and pinion and can be controlled very precisely. Also, the drilling depth can be set by means of a depth stop. The machine has a *PRCD switch that guarantees additional safety at work. This very complete machine can be used both on location and in the workplace.

This machine is supplied with a Cross laser (see Pico 100 L in picture left above) in order to place the machine at the point exactly where has to be drilled.

* PRCD, Portable Residual Current Device. A special safety switch which provides  protection against electrocution as a result of current leakage and prevent  unwanted entry into force of the machine, after a complete AC power loss. To exploit this additional safety, the machine MUST be connected to a grounded wall socket.

Motor Type
-
Direct Drive 1,5 KW, 230 V/50 Hz
Speed
-
Continuous 0 - 1700. r.p.m.
Drill diameter
-
Maximum 75 mm
Drill Depth
-
Maximum 20 mm
Cooling water Connection
-
Gardena, Quick connector
Dimensions
-
260 x 460 x 280 mm
Weight
-
14 Kg

Attention !

In order to prevent damage during transport the machine will be shipped on a small pallet. When ordering through our website you can ask for a quote Including Transportation.


1350.00 
€ 1181.05

Stock: -1
Delivery time 1 week


Article code: MA 1400L-8964

Pico Drill 100 Mobile Glass drill with Cross laser


  • Product info

Pico Drill 100 L

Mobile Glass drill

This precision machine developed by Bohle, can be applied directly to the glass. For this purpose, the machine is equipped with rubber outsole at the bottom and to the left and right of the machine base with suction units to be able to fixate the machine properly. Herewith a good stability is obtained. The lowering of the drill in the glass can be done via the rack and pinion and can be controlled very precisely. Also, the drilling depth can be set by means of a depth stop. The machine has a *PRCD switch that guarantees additional safety at work. This very complete machine can be used both on location and in the workplace.

This machine is supplied with a Cross laser (see Pico 100 L in picture left above) in order to place the machine at the point exactly where has to be drilled.

* PRCD, Portable Residual Current Device. A special safety switch which provides  protection against electrocution as a result of current leakage and prevent  unwanted entry into force of the machine, after a complete AC power loss. To exploit this additional safety, the machine MUST be connected to a grounded wall socket.

Motor Type
-
Direct Drive 1,5 KW, 230 V/50 Hz
Speed
-
Continuous 0 - 1700. r.p.m.
Drill diameter
-
Maximum 75 mm
Drill Depth
-
Maximum 20 mm
Cooling water Connection
-
Gardena, Quick connector
Dimensions
-
260 x 460 x 280 mm
Weight
-
14 Kg

Attention !

In order to prevent damage during transport the machine will be shipped on a small pallet. When ordering through our website you can ask for a quote Including Transportation.