Pico Drill 100 Mobile Glass drill
Pico Drill 100 Mobile Glass drill
8963
Pico Drill 100
Mobile Glass drill
This precision machine developed by Bohle, can be applied directly to the glass. For this purpose, the machine is equipped with rubber outsole at the bottom and to the left and right of the machine base with suction units to be able to fixate the machine properly. Herewith a good stability is obtained. The lowering of the drill in the glass can be done via the rack and pinion and can be controlled very precisely. Also, the drilling depth can be set by means of a depth stop. The machine has a *PRCD switch that guarantees additional safety at work. This very complete machine can be used both on location and in the workplace.
This precision machine developed by Bohle, can be applied directly to the glass. For this purpose, the machine is equipped with rubber outsole at the bottom and to the left and right of the machine base with suction units to be able to fixate the machine properly. Herewith a good stability is obtained. The lowering of the drill in the glass can be done via the rack and pinion and can be controlled very precisely. Also, the drilling depth can be set by means of a depth stop. The machine has a *PRCD switch that guarantees additional safety at work. This very complete machine can be used both on location and in the workplace.
This machine can also be supplied with a Cross laser (see Pico 100 L in picture left above) in order to place the machine at the point exactly where has to be drilled.
* PRCD, Portable Residual Current Device. A special safety switch which provides protection against electrocution as a result of current leakage and prevent unwanted entry into force of the machine, after a complete AC power loss. To exploit this additional safety, the machine MUST be connected to a grounded wall socket.
Motor Type | - | Direct Drive 1,5 KW, 230 V/50 Hz |
Speed | - | Continuous 0 - 1700. r.p.m. |
Drill diameter | - | Maximum 75 mm |
Drill Depth | - | Maximum 20 mm |
Cooling water Connection | - | Gardena, Quick connector |
Dimensions | - | 260 x 460 x 280 mm |
Weight | - | 14 Kg |
Attention !
In order to prevent damage during transport the machine will be shipped on a small pallet. When ordering through our website you can ask for a quote Including Transportation.
€ 1083.90
Stock: 0
Delivery time 1 week
Article code: MA 1400-8963
- Product info
Pico Drill 100
Mobile Glass drill
This precision machine developed by Bohle, can be applied directly to the glass. For this purpose, the machine is equipped with rubber outsole at the bottom and to the left and right of the machine base with suction units to be able to fixate the machine properly. Herewith a good stability is obtained. The lowering of the drill in the glass can be done via the rack and pinion and can be controlled very precisely. Also, the drilling depth can be set by means of a depth stop. The machine has a *PRCD switch that guarantees additional safety at work. This very complete machine can be used both on location and in the workplace.
This precision machine developed by Bohle, can be applied directly to the glass. For this purpose, the machine is equipped with rubber outsole at the bottom and to the left and right of the machine base with suction units to be able to fixate the machine properly. Herewith a good stability is obtained. The lowering of the drill in the glass can be done via the rack and pinion and can be controlled very precisely. Also, the drilling depth can be set by means of a depth stop. The machine has a *PRCD switch that guarantees additional safety at work. This very complete machine can be used both on location and in the workplace.
This machine can also be supplied with a Cross laser (see Pico 100 L in picture left above) in order to place the machine at the point exactly where has to be drilled.
* PRCD, Portable Residual Current Device. A special safety switch which provides protection against electrocution as a result of current leakage and prevent unwanted entry into force of the machine, after a complete AC power loss. To exploit this additional safety, the machine MUST be connected to a grounded wall socket.
Motor Type | - | Direct Drive 1,5 KW, 230 V/50 Hz |
Speed | - | Continuous 0 - 1700. r.p.m. |
Drill diameter | - | Maximum 75 mm |
Drill Depth | - | Maximum 20 mm |
Cooling water Connection | - | Gardena, Quick connector |
Dimensions | - | 260 x 460 x 280 mm |
Weight | - | 14 Kg |
Attention !
In order to prevent damage during transport the machine will be shipped on a small pallet. When ordering through our website you can ask for a quote Including Transportation.