Sawing  
Nederlands  Deutsch  English  Fran├žais 

Shopping cart

Machines

 | 

Sawing



 Machine parts




Zephyr diamond ring saw machine, 220 volt

Zephyr diamond ring saw machine, 220 volt




7006



Zephyr Diamond Ring Saw Machine 230 Volts.

This machine comes with a standard (Diamond) ring blade (diameter of 175 mm). Not just for cutting glass but also Stone, Concrete, Brass, Steel etc.
With this machine glass or stone objects with a height of 40 mm can be cut.

The Zephyr  complies with the CE standards, features a person safety switch with zero voltage protection, comes with safety goggles and extensive operating instructions.

This Ring Saw can be used very easy as 'Hand Held'. Watch the movie on this machine




€ 605.50
(+ US Dollar compensation € 35.70)


Stock: 8


Quantity  



Gryphon Diamond  machine, Model C 40  (Band Saw)

Gryphon Diamond machine, Model C 40 (Band Saw)




9495

Gryphon Diamond  Band Saw machine, Model C 40  

A band saw that can handle a lot. The supplied band saw is extremely flexible and is fast in cutting glass and stone, with a minimum of material loss.
The C 40 band saw is a machine that makes considerably less noise compared to the Ring Saw machines. On the C 40 one can cut glass or stone objects with a height of 64 mm.That's 24 mm more than the Zephyr Ring Saw can.
With the supplied transformer MO 1025 allows this machine to be used on a 230 volt outlet

The C40 complies with the CE standards, features a person safety switch with zero voltage protection, comes with safety goggles and extensive operating instructions.



€ 605.50
(+ US Dollar compensation € 35.70)


Stock: 3


Quantity  



Model C-40 CR Custom, 230 Volt, Aquasaw

Model C-40 CR Custom, 230 Volt, Aquasaw




10065



The C 40 CR Custom, is based on the Standard C 40 but has been modified for corrosion resistance, especially for use with salt water while cutting coral or similar material. The stainless steel parts and added shielding, reduces corrosion and extend the life of the machine. The C 40 CR CUSTOM  is provided with a 42” long Stainless steel saw blade. The width of the supplied saw blade is 1/8 inch (+/- 3 mm). This opens the possibility to saw large Coral pieces and/or, for glass workers the possibility to saw e.g. wine bottles, in the length in 2 pieces, which was not possible with the Standard C 40 machine. The maximum height to saw for the C 40 CR CUSTOM is 4.44 inch (+/- 114 mm)

The C40 complies with the CE standards, features a person safety switch with zero voltage protection, comes with safety goggles and extensive operating instructions.



€ 643.90
(+ US Dollar compensation € 37.00)


Stock: 6


Quantity  



Flex Diamond Glass Saw for Solid and / or Laminated glass

Flex Diamond Glass Saw for Solid and / or Laminated glass




10895

MA 555-10895

Flex Diamond Glass Saw for Solid and / or Laminated glass.

Important to know

This machine is modified for sawing of Solid - and / or Laminated glass, and herewith significantly different from identical looking machines. This machine comes, among others, with a very special saw blade for sawing Solid glass and / or Laminated glass.

Some characteristics:

-

Very solid construction.
-

Extra powerful motor for sawing and full glass or laminated glass..
-

Provided with a  * PRCD switch as security against current leakage and unwanted activation after general loss of power.
-

Continuously variable sawing depth adjustment of 0-60 mm, with side guid up to 54 mm.
-

At an angle of 45° from 0-44 mm, with guide up to 38 mm.
-

Variable angle adjustment for working in angles of 0-45 °
-

Provided with a brass Quick coupling for cooling water
-

Provided with an Ax-lock (for the removal and / or application of the saw blade)

Technical data

Model        

Flex (Modified))
Voltage

230 V AC nominal
Motor type

Direct Drive. (1400 Watt)
Output power

1,1 hp (840 Watt)
Electrical Safety

leakage current and zero-voltage protection
Motor rotation speed  

6200 RPM
Weight

4,5 kg


* PRCD, Portable Residual Current Device. A special safety switch which provides  protection against electrocution as a result of current leakage and prevent  unwanted entry into force of the machine, after a complete AC power loss. To exploit this additional safety, the machine MUST be connected to a grounded wall socket.


€ 1092.35


Stock: 0

Delivery time 1 week


Quantity